Wiring Harness Restoration can restore your harness or find a core to rebuild.
In some cases, we can build you a complete harness from our supply of reclaim OEM parts but it is almost always better to have a core harness to restore. The wring connector pins need to be deoxidized so we can solder a new wire onto the old pins. This can be very time-consuming. Connector pins oxidize over time, voltage and amps flowing through the harness help to slow down the oxidation, but it will never stop it. So a harness that has sat for some time will have more oxidization than one that has been in use, because of this it is usually better to rebuild your harness.
The pins are stripped from the connectors and when needed from the wires, then cycle-soaked in a solution that will deoxidize the metal. However, it also removes a microscopic amount of metal. Then they air dry for up to 7 days and we test and inspect to see how much oxidation is reforming. The process repeats on the ones that have oxidation reforming until they are completely deoxidized. At that point, we vacuum seal the clean pin until we have all of them clean. Then coat the pins with a solution and finally a top coat of grease-like substance that is designed to protect the terminal and slow down oxidation formation.
Do you need to modernize your harness with better quality and larger wires than the factory? Ask us about an upgrade to a modern fuse box and install a hidden fuse for classic vehicles. We can install a custom wrap that will help protect the harness from the elements. That is a perfect choice for hot regions, off-road, marine, and coastal customers.
Vehicle manufacturers only support wiring harnesses for 7 to 10 years.
That doesn’t seem right does it, but the fact is we live in a disposable world. Don’t dispose of your car, we can help!
Here is a sample list of Wiring Harnesses we have restored:
Automotive
Marine
Off-Road
ATV
Motorcycle
Industrial Equipment
Vintage Computer, Stereo, TVs, and Appliances
Exercise Equipment such as Stair Climbers and Treadmills
Amplifiers, CB, Car Audio, Ham Radio
Electric Guitar and Amplifiers, Mixing Board, and Recording Equipment.
Vintage Shop Equipment
So if it has wires and connectors we can fix or restore it.
We Sale and Rebuild Mobile Electrical Products
Starters, Alternators, Motors, Relays, and Switches. Even parts for your harness, and coverings. The only thing we do not sell is reclaim connectors or pins because we need them for the restorations, tell us what you are looking for and we will find it for you.
Use this form if you need information about having your wiring harness restored.